Maintainance Chemicals

Air cooler cleaner

Description :

During the operation, the fins & tubes of the main engine air cooler which become fouled with oil, grease, dust and carbonaceous deposits which reduce the efficiency of air coolers, air compressors, exhaust valves & other equipment Air cooler cleaner penetrates the deposits, dissolves oil & grease which can be washed away with the water jet

Chemical Composition :

Air cooler cleaner is a combination o highly effective solvents, detergents & corrosion Inhibitors.

Physical Properties :

Appearance :Light amber liquid
SP. GA. :0.975
Flash Pt :70° C
Solubility :Forms emulsion with water
Toxicity :Nil

Method of Application :

ACC can be applied by injection, Immersion, or circulation. For Immersion and circulation, cleaning time is reduced considerably by heating the chemical to maximum 50°C (122°F). If the air coolers are very dirty it may be advisable to use Alkaline solution to thoroughly clean the system before commencing ACC Injection treatment.

Immersion Method :

The dismantled parts to be cleaned are laid in a tank specially designed for the purpose, which has been filled with ACC. Movement ii achieved by means of compressed air. Cleaning time : 5 -12 hours.

1) For in place without dismantling : Put sufficient quantity of Air cooler cleaner in a drum. By using a suction hose     connecting one end to spray distributor and other to pump discharge, continuously spray the parts till equipment Is clean     by visual Inspection. After cleaning, purge & vent the equipment with air to remove solvent vapour..

2) Hand Spray: Remove air trunk or access door. Spray air cooler cleaner with a paint spray gun. When soiled parts are     completely saturated with solvent cleaner, apply water & wash the deposits of the air coolers.

3) For In-Service Cleaning In regular use 30-35% emulsion with fresh water and may be sprayed to obtain minimum results.

Caution

When using air cooler cleaner ensure adequate ventilation & keep away from extreme heat or open flame. Avoid breathing vapours & do not take internally. Do not let eyes, skin or clothing come In contact with the liquid.


Material Safety Data Sheet

1.Identification of the preparation:

Product name: AIR COOLER CLEANER .
Safety sheet number: N. A.
Manufacturer: NOVA CHEMICALS, room.No.50, 4th floor, Paragji Vrindavan CHS, 20/24, old hanuman lane, MUMBAI-400 002

2.Composition / Information on ingredients:

Description: Concentrated Cleaner for charger coolers.
Composition: Proprietary biodegradable surfactants.

3.First aid measures:

General recommendations: Product contaminated clothing should be removed immediately.
Inhalation: Escort patient to fresh air. If rapid recovery does not occur, obtain medical attention.
Contact with skin: Wash with water & soap.
Contact with eyes: Flush eye liberally with water. Obtain medical attention
Ingestion: Give a lot of water to drink. Obtain medical attention

4.Fire fighting measures:

Product is not flammable. In case of fire, all extinguishing media can be used. In case of fire, that might cause of the release of chemical product fire fighters should use protective clothing. Contaminated extinguishing water must be disposed off in accordance with local regulations.

5.Accidental release measure:

In case of leaks or spill avoid contact. Use personal protection Refer section 7.Prevent spillage from spreading by using sand, earth or other suitable material. Collect the spilled material in a closed container and remove to safe place for disposal by burning, large spills where material has come into the environment or sewer inform the local authority.

6.Handling and Storage:

Handling: Keep container closed and handle with care.
Technical measures: Maintain adequate ventilation, at a dry, cool place, keep away from acids.
Packing material: Polyethylene containers.

7.Exposure control / Personal protection:

Respiratory: Not normally required, invent of inhalation risk, wear respirator mask.
Eye: Chemical monogoggles recommended.
Skin: Standard issue work cloth, chemical resistant safety shoes or boots.

8.Physical and Chemical properties:

Appearance Clear liquid.
Colour Colourless to light amber.
PH Neutral.
Boiling Point -
Freezing Point -
Viscosity 30 seconds by Redwood No.1
Specific Gravity 0.8 to 0.85
flash point Above 80 degree celcius.
Solubility in water Emulsifiable in Water.

9.Stability and Reactivity:

Stability: Stable.
Conditions to avoid: Keep away from Alkalies.
Dangerous reactions: None.

10.Toxological information:

Acute oral toxicity: Ingestion is very harmful.

11.Ecological information:

Do not allow undiluted product to enter sewer system or canals/rivers.

12.Disposal considerations:

Product and non cleaned containers should be disposed off in accordance to local environmental regulations.

13.Other information:

The information contained herein is based on the present state of our knowledge and does not therefore guarantee certain properties. Recipients of our product must take responsibility for observing existing laws and regulations.