Maintainance Chemicals

Carbon remover

Description :

Carbon remover Is a chemical compound normally used for cleaning all carbonised engine or machine parts. It also removes old paint residues, grease & deposits, & carbonaceous residues formed by oil exposed to high temperature.

Method of Application :

Carbon remover is delivered ready for use. It is equally efficient for in-place cleaning & soaking of Individual parts. It may be necessary to heat carbon remover if heavy deposits or if rapid cleaning is required. Heating to 500C will multiply the efficiency. It should not be heated in a closed, unventilated area.

Soaking of the parts is the most efficient method. However spraying or brushing directly on the parts will also remove the carbonised matter efficiently. In case of very heavy deposits they should be allowed to soak for a longer period and if necessary they should be wire brushed. Then the surface should be completely wiped off with a clean cloth. Carbon remover not only cleans the parts but also provides a temporary baffler against corrosion.

Carbon can be removed without the use of any external heating arrangement & hence no power is required. As it contains wetting & emulsifying agents, life of the product Is prolonged. After extensive use, this product will likely become contaminated with sludge & deposits. At this time pour off the liquid, clean the deposit from the tank, then return the liquid adding new carbon remover to make up for that which was used.

Caution

When using carbon remover ensure adequate ventilation & keep away from extreme heat or open flame. Avoid breathing vapours & do not take internally. Do not let eyes, skin or clothing come in contact with the liquid.


Material Safety Data Sheet

1.Identification of the preparation:

Product name: CARBON REMOVER.
Safety sheet number: N. A.
Manufacturer: NOVA CHEMICALS, room.No.50, 4th floor, Paragji Vrindavan CHS, 20/24, old hanuman lane, MUMBAI-400 002

2.Composition / Information on ingredients:

Description: Concentrated Carbon deposit remover.
Composition: Proprietary Blend of surfactants, creasols & aromatic solvents.

3.First aid measures:

General recommendations: Product contaminated clothing should be removed immediately.
Inhalation: Escort patient to fresh air. If rapid recovery does not occur, obtain medical attention.
Contact with skin: Wash with water & soap.
Contact with eyes: Flush eye liberally with water. Obtain medical attention
Ingestion: Give a lot of water to drink. Obtain medical attention

4.Fire fighting measures:

Product is not flammable. In case of fire, all extinguishing media can be used. In case of fire, that might cause of the release of chemical product fire fighters should use protective clothing. Contaminated extinguishing water must be disposed off in accordance with local regulations.

5.Accidental release measure:

In case of leaks or spill avoid contact. Use personal protection Refer section 7.Prevent spillage from spreading by using sand, earth or other suitable material. Collect the spilled material in a closed container and remove to safe place for disposal by burning, large spills where material has come into the environment or sewer inform the local authority.

6.Handling and Storage:

Handling: Keep container closed and handle with care.
Technical measures: Maintain adequate ventilation, at a dry, cool place, keep away from acids.
Packing material: Polyethylene containers.

7.Exposure control / Personal protection:

Respiratory: Not normally required, invent of inhalation risk, wear respirator mask.
Eye: Chemical monogoggles recommended.
Skin: Standard issue work cloth, chemical resistant safety shoes or boots.

8.Physical and Chemical properties:

Appearance Clear liquid.
Colour Colourless to light amber.
PH Neutral.
Boiling Point -
Freezing Point -
Viscosity 30 seconds by Redwood No.1
Specific Gravity 1.0 to 1.05
flash point Above 66 degree celcius.
Solubility in water Insoluble in Water.

9.Stability and Reactivity:

Stability: Stable.
Conditions to avoid: Keep away from acids.
Dangerous reactions: None.

10.Toxological information:

Acute oral toxicity: Ingestion is very harmful.

11.Ecological information:

Do not allow undiluted product to enter sewer system or canals/rivers.

12.Disposal considerations:

Product and non cleaned containers should be disposed off in accordance to local environmental regulations.

13.Other information:

The information contained herein is based on the present state of our knowledge and does not therefore guarantee certain properties. Recipients of our product must take responsibility for observing existing laws and regulations.