General Cleaning Chemicals

Oil Spill Remover L.T (OSRLT)

Description :

Oil spill remover Li is a liquid compound developed to efficiently emulsify & disperse oil spill1 form all surfaces. Oil spill remover L.T. is neutral, containing neither acid nor alkali, non-explosive, non-corrosive & non injurious to personnel. Oil spill remover L.T. converts the messiest oil spills into a white milky mixture when agitated with water.

USAGE

It is used to clean up oil spills from any surface by efficiently emulsifying oil.

Application :

It is used undiluted directly & can be applied by pressure spray, ejector, nozzle jet, mopping or brushing on to oily surface.

Spraying :

Thoroughly wet oil by spraying oil spill remover L.T. on spill, allow oil spill remover L.T to mix with the oil for 15 to 30 minutes. Then emulsify the mixture by agitating it with a water jet.

Ejector Nozzle Jet :

For large oil spills which must be dealt with quickly, it is advisable to use an ejector nozzle. The ejector nozzle drawns oil spill remover L.T. into the jet stream which is then directed at the oil spill in progressive pattern. The force of the jet ensures agitation.

Mopping & Brushing :

If spraying equipment is not available or for small oil splits on ship decks, docks, piers, mix thoroughly with a mop, broom or brush. Then add salt water or fresh water & continuously mix till oil Is completely emulsified. Rinse with water


Metal Safety Data Sheet

1.Identification of the preparation:

Product name: OIL SPILL REMOVER L. T.
Safety sheet number: N. A.
Manufacturer: NOVA CHEMICALS, room.No.50, 4th floor, Paragji Vrindavan CHS, 20/24, old hanuman lane, MUMBAI-400 002

2.Composition / Information on ingredients:

Description: Concentrated Degreasing liquid.
Composition: Proprietary Blend of Corrosion Inhibitor, Surfactants, Glycol Ethers& Aromatic Solvents.

3.First aid measures:

General recommendations: Product contaminated clothing should be removed immediately.
Inhalation: Escort patient to fresh air. If rapid recovery does not occur, obtain medical attention.
Contact with skin: Wash with water & soap.
Contact with eyes: Flush eye liberally with water. Obtain medical attention
Ingestion: Give a lot of water to drink. Obtain medical attention

4.Fire fighting measures:

Product is not flammable. In case of fire, all extinguishing media can be used. In case of fire, that might cause of the release of chemical product fire fighters should use protective clothing. Contaminated extinguishing water must be disposed off in accordance with local regulations.

5.Accidental release measure:

In case of leaks or spill avoid contact. Use personal protection Refer section 7.Prevent spillage from spreading by using sand, earth or other suitable material. Collect the spilled material in a closed container and remove to safe place for disposal by burning, large spills where material has come into the environment or sewer inform the local authority.

6.Handling and Storage:

Handling: Keep container closed and handle with care.
Technical measures: Maintain adequate ventilation, at a dry, cool place, keep away from acids.
Packing material: Polyethylene containers.

7.Exposure control / Personal protection:

Respiratory: Not normally required, invent of inhalation risk, wear respirator mask.
Eye: Chemical monogoggles recommended.
Skin: Standard issue work cloth, chemical resistant safety shoes or boots.

8.Physical and Chemical properties:

Appearance Liquid.
Colour Colourless to Light Amber.
PH Neutral.
Boiling Point -
Freezing Point -
Viscosity 34 seconds by Redwood No.1
Specific Gravity 0.80 to 0.85
flash point Above 66 degree celcius.
Solubility in water Emulsifier in Water.

9.Stability and Reactivity:

Stability: Stable.
Conditions to avoid: Keep away from Acids.
Dangerous reactions: None.

10.Toxological information:

Acute oral toxicity: Ingestion is very harmful.

11.Ecological information:

Do not allow undiluted product to enter sewer system or canals/rivers.

12.Disposal considerations:

Product and non cleaned containers should be disposed off in accordance to local environmental regulations.

13.Other information:

The information contained herein is based on the present state of our knowledge and does not therefore guarantee certain properties. Recipients of our product must take responsibility for observing existing laws and regulations.