NOVACHEM ELECTROCLEAN SLOW DRY is a cold degreasing safety solvents. They combine the best cleaning qualities of the inflammable solvents and carbon tetra chloride, but eliminate the explosive and toxic dangers of these products. They are designed for degreasing and cleaning electrical equipments such as motors and generators, circuit breakers, distribution panels, machinery, instruments, etc. Additionally, these cleaners are very effective for removing dust particulates and oils where water washing in cumbersome, messy, troublesome or rust promoting.

USAGE :

NOVACHEM ELECTROCLEANERS, whilst having in common a high cleaning capacity, differ from each other in a number of special characteristics in this way they give a broad range of applications and make it possible to tackle various problems with the best possible results. NOVACHEM ELECTROCLEAN SLOW DRY dries slowly giving sufficient time for the solvent to be used economically over a wide area. Evaporates completely leaving no oily residue.

APPLICATION :

NOVACHEM ELECTROCLEANERS are easily applied by pressure jet, spray, brush, immersion or swab methods. As discussed above, Novachem Electroclean Slow Dry in virtually harmless to any type of insulating materials including plastics. NOVA ELECTROCLEANERS do not affect polyvinylchloride, nylon, Teflon, nitrocellulose and bakelite. Neoprene, rubber and buna rubber swell after prolonged contact. Polystyrene dissolves. Insulating materials are normally not harmed.

All NOVA ELECTROCLEANERS ARE LOW TOXIC, NON FLAMMABLE , NON CORROSIVE & NON EXPLOSIVE

CAUTION :

Although the rate of toxicity of Nova Electrocleaners is very low, careful attention should be given to adequate ventilation such as with the use of any solvent or paint. In case of contact with skin or eyes flush with plenty of water.