NOVACHEM Aquatuff HF is a strong water based high foaming biodegradable alkaline cleaner primarily designed to provide numerous cleaning applications: Does not contain Nonylphenol ethoxylates or Solvents

GENERAL SPECIFICATIONS :

Appearance : Clear to Hazy Viscous Liquid
Specific gravity : 1.04 to 1.07
pH-value at 24℃ : >12

APPLICATION FEATURES AND BENEFITS :

• Leaves no white stripes/ deposits on tank surfaces after washing with hot solution.
• Cleans vegetable oils, animal oils, fish oils, greases, waxes, oil, sludge, soot carbon deposits and general dirt and grime by thorough saponification.
• Very efficient for removing inert gas soot (IGS) residues from cargo tanks.
• Safe to use on epoxy coating, polyurethane coatings and in stainless steel tanks.
• Not suitable for use on Aluminium, Magnesium and Zinc silicate coatings.
• Ideal for cleaning after coal and pet coke.

DIRECTIONS FOR USE / APPLICATIONS AND DOSAGE RATES

General Cleaning NOVACHEM Aquatuff HF can be used for different types of cleaning, and it can be applied by brush, hand spray, High & Low pressure washing machines, by Direct Injections method but is mostly used by Recirculation method.

Removal of Soot from Inert GAS Systems (IGS)

Apply NOVACHEM Aquatuff HF with a H.P. cleaning machine and use 1:4 with water. If used by hand spray, apply neat on the surface @ 1 ltr per 12m2. Leave for about 30 – 45 minutes. The surface remains wet. Wash down with hot water at around 80°C. Repeat procedure 1 to 3, if required.

Cargo Tank and Cargo Hold Cleaning

NOVACHEM Aquatuff HF can be used for tank cleaning after animal, vegetable and fish oil, petroleum waxes, and for cargo hold cleaning after soot, coal, pet coke and other bulk materials
using the following methods -
• Direct injection method with tank washing machines: Dosage rate 10-15 lts. per 1000
liters wash water (1-5%). • Recirculation method: Use dosage rate of 20-50 liters per 1000 liter wash water.
• Spot Cleaning: Hand spray neat or prepare a 10-20 % solution. Leave for approx. 30 minutes before rinsing with water. Keep surface wet.

Pre Wash

Before cleaning tanks with NOVACHEM Aquatuff HF it is recommended to pre-wash cargo tanks with hot water 50-60°C. For Drying oils and semi- drying oils a prewash of the tanks with cold water should be applied. The efficient operating temperature varies and is depending upon the type of cargo residues which are to be cleaned. In cases like Palm oil residues the optimal solution temperature is between 55-65°C at the tank cleaning machine nozzle. Higher temperature tends to bake on the residues rather than removing them.
Hydrogenated oils contain stearic acid with melting point of approx. 70°C. To clean such cargo residues successfully, a temperature between 72-77°C at the tank cleaning machine nozzle must be used. Office